Milweld H-10 Spezifikationen PDF herunterladen (Seite 11)

OM-154 501 Page 7

3-2. Installing Gas Supply

1 Cylinder Bracket

2 S-Hook

Crimp between small hole in brack-

et and chain.

3 Chain

4 Snap

Crimp onto open end of chain.

Obtain gas cylinder and chain to

running gear.

5 Cap

6 Cylinder Valve

Remove cap, stand to side of valve,

and open valve slightly. Gas flow

blows dust and dirt from valve.

Close valve.

7 Cylinder

8 Regulator/Flowmeter

Install so face is vertical.

9 Gas Hose Connection

Fitting has 5/8-18 right-hand

threads. Obtain and install gas

hose.

10 Flow Adjust

Typical flow rate is 20 cfh (cubic feet

per hour). Check wire manufactur-

er’s recommended flow rate.

Make sure flow adjust is closed

when opening cylinder to avoid

damage to the flowmeter.

11 CO

Adapter

12 O-Ring

Install adapter with O-ring between

regulator/flowmeter and CO

cylinder.

To Gas

Regulator/

Flowmeter

Gas

11 12

Argon Gas Or

Mixed Gases

Tools Needed:

5/8, 1-1/8 in

ssb3.2* 5/94 − ST-154 623 / Ref. ST-149 827-B / Ref. ST-158 697-A

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Milweld H-10 Spezifikationen Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem Milweld H-10