Milweld H-10 Spezifikationen PDF herunterladen (Seite 20)

OM-154 501 Page 16

5-3. Fuses F1 And F2

Turn Off unit and disconnect input

power.

1 Fuse F1 (See Parts List For

Rating)

F1 protects the 115 volts ac winding

of transformer T1. If F1 opens, all

weld output stops and pilot light PL1

goes out.

2 Fuse F2 (See Parts List For

Rating)

F2 protects the 24 volts ac winding

of transformer T1. If F2 opens, all

weld output stops.

Ref. ST-800 928-B

5-4. Changing Drive Rolls And Wire Inlet Guide

1 Securing Screw

2 Inlet Wire Guide

Loosen screw. Slide tip as close to

drive rolls as possible without

touching. Tighten screw.

3 Anti-Wear Guide

Install guide as shown.

4 Drive Roll

Install correct drive roll for wire size

and type.

5 Drive Roll Securing Nut

Turn nut one click to secure drive

roll.

5/64 in

7/16 in

Tools Needed:

ST-150 227-C

5-5. Aligning Drive Rolls And Wire Guide

View is from top of drive rolls look-

ing down with pressure assembly

open.

1 Drive Roll Securing Nut

2 Drive Roll

3 Wire Guide

4 Welding Wire

5 Drive Gear

Insert screwdriver, and turn screw

in or out until drive roll groove lines

up with wire guide.

Correct Incorrect

Tools Needed:

Ref. ST-801 412-A

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Milweld H-10 Spezifikationen Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem Milweld H-10